Polyvance R02-08-03-NT V-Shape Polypropylene Corner Welding Rod (30 ft)

$29.47
Out of stock
SKU
MWR020803NT
We found the stickiest PP resin on the market and extrude it into a 90 deg, V-shaped profile thats 1/4 in (6.4 mm) on each of the sides. These rods are very convenient when welding flanges on bumper covers or any other time that you need to weld 2 pieces of at a 90 deg angle. This rod comes conveniently packaged as a 30 ft (9.1 m) pack. Each stick is 1 ft (30.5 cm) long and there are 30 sticks in one pack. There are approximately 132 sticks per pound. Use this rod with a hot air welder for welding up bumper covers made from PP blends (TPO, TEO, PP/EPMD, etc.) This rod is the natural color. No pigment has been added.

Stock: 8

We found the stickiest PP resin on the market and extrude it into a 90 deg, V-shaped profile thats 1/4 in (6.4 mm) on each of the sides. These rods are very convenient when welding flanges on bumper covers or any other time that you need to weld 2 pieces of at a 90 deg angle. This rod comes conveniently packaged as a 30 ft (9.1 m) pack. Each stick is 1 ft (30.5 cm) long and there are 30 sticks in one pack. There are approximately 132 sticks per pound. Use this rod with a hot air welder for welding up bumper covers made from PP blends (TPO, TEO, PP/EPMD, etc.) This rod is the natural color. No pigment has been added.

Features:

  • Works with airless, hot-air and nitrogen plastic welders
  • The corner rod allows you to get stronger welds on flanges and corners
Write Your Own Review
You're reviewing:Polyvance R02-08-03-NT V-Shape Polypropylene Corner Welding Rod (30 ft)

No SDS/TDS file available at this time.