Dent Fix Equipment DF-1610TC Spot Weld Drill Bit
$40.12
In stock
SKU
DNTDF1610TC
The DF-1610TC titanium carbo nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twist is 10 mm and the shank is 8 mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills.
WARNING: Cancer and Reproductive Harm
The DF-1610TC titanium carbo nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twist is 10 mm and the shank is 8 mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills.
Our drill bits a specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. These German made spot weld bits are available in 2 sizes 8 mm (DF-1680TC) and 10 mm (DF-1610TC).
Features:
- Flat ground for strength
- Centering nib to prevent walking
- 10 mm Diameter
- 45 mm Length
- Cobalt High Speed Steel
Write Your Own Review
No SDS/TDS file available at this time.
We found other products you might like!
