Charger R822 Series Conical Flap Disc 4 1/2 in P80 Grit Blue

When speed and accuracy matter, choose this Charger R822 coarse grit center mount fiberglass conical flap disc for use with your right angle grinder on contour and edge work. The angled flaps provide greater surface contact, and the fiberglass/resin back plates absorb vibration well for operator comfort. This disc is an excellent choice for blending, beveling, deburring and stock removal in the collision repair, contracting, manufacturing and metal fabrication industries, thanks to the zirconia alumina abrasive that provides an aggressive cut and performs two to three times better than aluminum oxide products.

Features:

• Type 29 conical flap discs with zirconia alumina abrasive for aggressive cut and long life with 2 to 3 times total performance over aluminum oxide products, excellent choice for mild carbon steel and welds
• Their fiberglass/resin backing plates are the most popular plate configuration due to high strength, lightweight, ability to absorb vibration, and operator comfort
• Angled, polyester/cotton flaps provide greater surface contact and are the best choice when speed of job completion and stock removal are primary considerations, may be used on contour and edge work
• Excellent choice for coarse grit blending, deburring, and stock removal