Polyvance 3601-4 Bumper & Cladding Coat Gray Adhesion Primer (Quart)

$71.43
In stock
SKU
MW36014
Bumper & cladding coat adhesion primer is an advanced, solvent-based coating designed to help your automotive base-clear topcoat system stick to unprimed TPO plastic bumpers. Bumper & cladding coat Adhesion Primer sticks tenaciously to unsanded, unscuffed raw TPO plastic. Once the adhesion primer is dry, it can be topcoated with most base clear systems without sanding or scuffing. (6.3 lb/gal VOC). Bumper & cladding adhesion primer is designed to permanently stick to the bumpers, side cladding and trim found on many of today's cars, trucks and SUV's. As everyone knows, most bumpers are made from plastics that are very difficult to get anything to stick to. Bumper & cladding adhesion primer will stick to raw TPO and polypropylene. Once the primer is on, your basecoat clearcoat will stick.
  • Buy 2 for $62.86 each and save 12%
  • Buy 3 for $60.00 each and save 16%

Stock: More than 10 available

WARNING: Cancer and Reproductive Harm

Bumper & cladding coat adhesion primer is an advanced, solvent-based coating designed to help your automotive base-clear topcoat system stick to unprimed TPO plastic bumpers. Bumper & cladding coat Adhesion Primer sticks tenaciously to unsanded, unscuffed raw TPO plastic. Once the adhesion primer is dry, it can be topcoated with most base clear systems without sanding or scuffing. (6.3 lb/gal VOC). Bumper & cladding adhesion primer is designed to permanently stick to the bumpers, side cladding and trim found on many of today's cars, trucks and SUV's. As everyone knows, most bumpers are made from plastics that are very difficult to get anything to stick to. Bumper & cladding adhesion primer will stick to raw TPO and polypropylene. Once the primer is on, your basecoat clearcoat will stick.

Features:

  • Sticks to smooth or textured TPO plastics, ideal for easy refinishing of new, unprimed OEM replacement bumpers from Toyota, Nissan, Kia, Subaru, etc
  • No sweat, quit sweating your bumpers in the paint booth, no need to clean, sweat, re-clean and so on
  • Sticks to TPO plastic without sanding or scuffing, just clean the bumper with our 1000 super clean plastic cleaner and shoot the bumper and cladding adhesion primer on
  • Simple, ready-to-spray, 1K formulation means there's no waste, what you don't use, pour back into the can
  • Compatible with most urethane and polyester-based base clear topcoat systems, bumper and cladding adhesion primer does not have to be scuffed or sanded prior to topcoating and it may be topcoated at any time after application
  • A proven labor saver since its introduction in 2003
Write Your Own Review
You're reviewing:Polyvance 3601-4 Bumper & Cladding Coat Gray Adhesion Primer (Quart)