Polyvance R01-01-03-NT Round Welding Rod (1/8 in Dia x 30 ft L)

$31.70
In stock
SKU
MW5003R1
Urethane bumper covers were very popular in the 80's and 90's. They are not as common, but are still made. Whenever you have a bumper cover that is made of yellow plastic, that is the indicator the plastic is thermoset polyurethane. This is the welding rod you need to repair thermoset polyurethane. This is not a true fusion weld. Instead, it is similar to a braze repair, but the bond strength for this repair material is amazing. If you see the symbols PUR or RIM on the bumper, this is the rod that you need. This rod is 30 ft (9.1 m) long and 1/8 in (3 mm) in Dia and is applied using one of Polyvance's airless plastic welders.

Stock: More than 10 available

Urethane bumper covers were very popular in the 80's and 90's. They are not as common, but are still made. Whenever you have a bumper cover that is made of yellow plastic, that is the indicator the plastic is thermoset polyurethane. This is the welding rod you need to repair thermoset polyurethane. This is not a true fusion weld. Instead, it is similar to a braze repair, but the bond strength for this repair material is amazing. If you see the symbols PUR or RIM on the bumper, this is the rod that you need. This rod is 30 ft (9.1 m) long and 1/8 in (3 mm) in Dia and is applied using one of Polyvance's airless plastic welders.

Features:

  • Rod diameter fits perfectly into the standard welding tip of Polyvance's mini weld airless plastic welder
  • Use this rod for bumper covers and fenders made our of yellow plastic
Write Your Own Review
You're reviewing:Polyvance R01-01-03-NT Round Welding Rod (1/8 in Dia x 30 ft L)

No SDS/TDS file available at this time.