Polyvance R02-06-03-NT Flat Polypropylene Welding Rod (12 in.)
$37.44
In stock
SKU
MWR020603NT
Make super strong welds on TPO and polypropylene bumper covers using this thick polypropylene strip. This thick strip works well to prevent bending in the repair area and, therefore, prevent a rebreak in the same area. Best when used with a hot air welder or, even better, a nitrogen welder. Each polypropylene welding piece is 1 ft long (30 cm), 1/2 in (12.7 mm) wide and 3/32 in (2.4 mm) thick. No pigment has been added so the color is the natural color of polypropylene. There are 30 rods in a pack. There are approximately 60 rods per pound (453 g).
Make super strong welds on TPO and polypropylene bumper covers using this thick polypropylene strip. This thick strip works well to prevent bending in the repair area and, therefore, prevent a rebreak in the same area. Best when used with a hot air welder or, even better, a nitrogen welder. Each polypropylene welding piece is 1 ft long (30 cm), 1/2 in (12.7 mm) wide and 3/32 in (2.4 mm) thick. No pigment has been added so the color is the natural color of polypropylene. There are 30 rods in a pack. There are approximately 60 rods per pound (453 g).
Features:
- Works with airless, hot-air and nitrogen plastic welders
- Thick profile gives better bending resistance
Write Your Own Review
No SDS/TDS file available at this time.