Polyvance R02-08-04-NT V-Shape Polypropylene Corner Welding Rod (12 in.)
$64.45
In stock
SKU
MWR020804NT
We found the stickiest PP resin on the market and extrude it into a 90 deg, V-shaped profile thats 1/4 in (6.4 mm) on each of the sides. These rods are very convenient when welding flanges on bumper covers or any other time that you need to weld 2 pieces of at a 90 deg angle. This strip comes conveniently packaged by the pound (0.45 kg) in 1 ft (30.5 cm) lengths. There are approximately 150 sticks per pound. Use this rod with a hot air welder for welding up bumper covers made from PP blends (TPO, TEO, PP/EPMD, etc.) This rod is the natural color. No pigment has been added.
We found the stickiest PP resin on the market and extrude it into a 90 deg, V-shaped profile thats 1/4 in (6.4 mm) on each of the sides. These rods are very convenient when welding flanges on bumper covers or any other time that you need to weld 2 pieces of at a 90 deg angle. This strip comes conveniently packaged by the pound (0.45 kg) in 1 ft (30.5 cm) lengths. There are approximately 150 sticks per pound. Use this rod with a hot air welder for welding up bumper covers made from PP blends (TPO, TEO, PP/EPMD, etc.) This rod is the natural color. No pigment has been added.
Features:
- Works with airless, hot-air and nitrogen plastic welders
- The corner rod allows you to get stronger welds on flanges and corners
Write Your Own Review
No SDS/TDS file available at this time.