Rusfre 5050 Mitey Bee Undercoat Gun

Mitey bee gun Rusfre 1020F-1 comes in 1 gallon plastic disposable containers which can be used as received. Unscrew and remove cap "A". Insert dip tube "B into the container and screw on cap "C" which is attached to the material hose "D" of the 5050 gun. Attach air line "E". Raise airline pressure to 40 to 60 psi and the gun is ready to use.

Features:

• Hold the gun approximately 10 in from the surface to be coated
• Squeeze the trigger and hold for a few seconds for the material to appear
• Spray in even strokes until you get the coating desired
• The spray can also be affected by the amount of air pressure used: the lower the pressure the coarser the spray
• Do not use too much pressure in clearing the gun or it will damage the container and its lid
• Keep your gun and tip clean by flushing it after use with 1050q or 1050-1 cleaner and reducer or paint thinner, do not use lacquer thinner
• Use with: Gallon jugs

Includes:

• Pickup Tube 10-1/2 in. Length
• 3/8 in. Input, 1/2 in. Output and 38-1/2 in. Length Hose